Newsletter
Register and stay informed about new products, features and firmware.
createl_smartphone
» » » Kit MREP 73 - Delivered with 10 badges and a Dinrail power supply 12 VDC


All products in the same category
<
>


Techfass

Kit MREP 73 - Delivered with 10 badges and a Dinrail power supply 12 VDC

- Kit MREP 73/10
Kit MREP 73 - Delivered with 10 badges and a Dinrail power supply 12 VDC
See larger image

All the views of the product:
Kit MREP 73 - Delivered with 10 badges and a Dinrail power supply 12 VDC

540,00€ Excluding VAT
653,40€ VAT INCLUDED


Included : 1 reader MREP 73, power supply en 10 badges

Product options :
:
:
Add to quotation requests
Quantity : 
Available Dispatched within 3 days


Add to my wishlist Add to my wishlist


Export in pdf


  • description
  • Shipping / Payment

 

The MREP 73-EM reader modules (125 kHz readers with an embedded single door controller) are designed for connection to the RS 485 bus of the APS mini Plus access control system, or for standalone operation. It is possible to connect up to 32 reader modules to a single line of the APS mini Plus system. In effect the number of lines is not limited.

This product replaces following types: MREP 53-EM.

 

Mechanical design
Weight 0.250 kg
Operating temperature -25°C ÷ +60°C
Humidity Max. 95%, non-condensing
Housing IP 52
Cable length 0.5 m
Color Light grey
Dimensions 105x90x20 mm

 

Technical features
Supply voltage 8 ÷ 15 VDC
Current demand Typical 80 mA
Maximal 120 mA
Keypad PIN keypad, 14 keys
Operating frequency 125 kHz
ID technology, typical reading range TF media 8 cm (with ISO card)
EM Marin 8 cm (with ISO card)
HID Prox 5 cm (with ISO card)
Prastel 8 cm (with ISO card)
Real time clock Yes, with self backup for 12 hrs.
Memory ID media 748 ID, 2 master cards
Events 4,700
Time schedules 64
Inputs Door status Logical potential-free contact
Exit button / Handle Logical potential-free contact
Outputs Door lock Relay NC/NO, 2A/24V
Alarm Transistor output 5V/5mA
Indicators 3x LED
1x PIEZO buzzer
Tamper protection Against tearing-off Reed contact (requires MAG)
Communication interface RS 485 for system BUS
Addresses used at system BUS 1 address
HW address setting type Software configuration
External device interface 1x WIEGAND input / output
1x I/O port - ext. tamper / ext. reader buzzer control / input for IDS status monitoring
Alternative data output WIEGAND (configurable)
 
  • description
  • Shipping / Payment

 

 



Products
Kit MREP 73 - livré avec 10 badges et alimentation raildin 12VDC